3/8″ X 1/4″ 2 WAY JG FLOW DIVIDER PP241208W

These fittings are food-grade and suitable for potable liquids and pure water applications, as well as being chemical resistant.

• Polypropylene body, EPDM O-ring & polypropylene collet with SS teeth
• Connect & disconnect tubing without tools
• Use fittings with rigid tubing
• Will withstand a full vacuum
• Not suitable for compressed air
• Working pressure: 150 psi at 70°F; 60 psi at 140°F
• Temperature range: 33°F to 140°F
• Meets FDA standards & NSF listed

Also suitable for vacuum

Depending on the tube used, under certain conditions fittings may be used at higher pressures and temperatures. Please refer to our Customer Services Department for guidance. Note 1 Bar = 14.5 PSIG.

Tube Types

Plastic Tube – Polyethylene, nylon and polyurethane conforming to the tolerances shown below. For soft tubing or thin wall tube we recommend the use of tube inserts.

Braided Tube – Use of Tube to Hose Stems listed on pages 11, 16, 18, 21 and 26 is essential when using tube. Use of clamps to retain braided tube on barbs is recommended.

Metal Tube (soft) – Brass, copper or mild steel conforming to the tolerances below.

Metal Tube (hard) – We do not recommend Super Speedfit fittings for hard metal or chromium plated tubes.

For stainless steel and other polished metal tubes we recommend the use of Superseal fittings. These are shown on page 9 of this brochure.
It is essential that outside diameters be free from score marks and that the tube be deburred before inserting the fitting.