8 GPM PWM Hydraulic Control Valve, with adapter cable, Micro-Trak, 01745
Micro-Trak’s Hydraulic Flow Control Valves have years of field-proven performance and reliability.
Pair one with Micro-Trak controller for precision 12V control of hydraulic oil flow on hydraulic-driven planters, hydraulic-driven conveyor and spinner applicators, and on pull-type and self-propelled sprayers with hydraulic-driven liquid pumps.
- Internally protected, safe, flexible, efficient, and easy to use
- Reduces pump wear
- Ideal for open, closed, or load sense systems
- Available in 12VDC Standard or Pulse Width Modulated models
A solenoid-operated, electrically-variable, three-port, pressure-compensated, spool type, normally closed when de-energized, proportional flow control valve. It can be used as a priority-type flow regulator with pressure-compensated, regulated and bypass flow. It can also be used as a restrictive-type 2-way, pressure-compensated flow regulator when the bypass line (port 2) is blocked. The three ports are labeled by number. They are:
1 – Inlet
2 – Bypass (can be plugged for closed center configuration)
3 – Regulated Flow
Built in the USA
Built to Last
8 GPM PWM VALVE ASSEMBLY
- Operating Pressure Inlet – 240 bar (3500 psi), Ports 2 and 3 – 207 bar (3000 psi)
- Regulated Flow Rate  Bypass Blocked – 26 lpm (7 gpm) Bypass Open – 30 lpm (8 gpm)
- Maximum Input Flow Bypass Open – 50 lpm (13 gpm)
- Internal Leakage 197 cc/min. (12 cu. in./min.) fully closed at 207 bar (3000 psi)
- Electrical 12 VDC Threshold current 350 ± 70 mA Max. current 1500 ± 200 mA
DOWNLOAD THE MICRO-TRAK MOTOR CONTROLLER PRODUCT BROCHURE
DOWNLOAD THE INSTALLATION MANUAL FOR THE 25AMP MANUAL ELECTRONIC MOTOR DRIVER