AirMix® Nozzle, Low Pressure-AM, AM11005, Greenleaf Technologies, Brown
- DROPLET SIZE: XC-M
- GPM/Nozzle: .31-.75
- Pressure Range: 15-90 psi
- Recommended Boom Height: 16-36” (with 20” nozzle spacing)
- Materials of Construction: Polyacetal, or polypropylene with EPDM (AMCQ)
- Color: Brown
Features
- AM 110° Flat Fan AirMix® Venturi Nozzle
- AMDF Dual 110° Flat Fan AirMix® Venturi Nozzle
- AMCQ 110° Flat Fan Acid Resistant AirMix®
- AMOC Off Center AirMix®
- 15-90 psi Overall pressure range
- Estimated life (60’ boom, 20” centers) 15,000-20,000 acres
AirMix® Specifications and Why
- AirMix® Nozzle is a compact, economical air injection nozzle designed to provide both drift control and surface coverage at conventional spray pressures.
- The AirMix® produces a coarser droplet spectrum than either the XR* or Turbo TeeJet®*, across a wider range of pressure. For example, if a 300-600 micron VMD is desired, the 11004 AirMix® may be operated between 15 and 70 psi; the Turbo TeeJet®* must stay below 30 psi, and the XR* cannot be used. Because the AirMix® produces droplets that are roughly 50% air bubbles, the AirMix® provides twice the number of droplets than a similar VMD conventional nozzle.
- The AirMix® reduces the percentage of driftable fines by about 80% compared to the XR*, and 50% compared to the Turbo TeeJet®*. For example, at 30 psi almost 10% of the spray is “driftable fines” with the XR*, and over 4% with the Turbo TeeJet®*.
- The AirMix® has less than 2% of its volume as driftable fines.
- The AirMix® has a wider overall pressure range, with a unique combination of drift control and coverage.
Download your Greenleaf Nozzle Spacing Tab Chart Here, Direct From Our Knowledge Base!
AirMix® is available in four configurations:
- AM Low Pressure AirMix® Venturi Nozzle, 110° Flat Fan
20-60 psi Optimal Pressure Range
Two piece, polyacetal construction. No tools required for disassembling. Fits standard caps.
- AMDF Dual AirMix® Venturi Nozzle, Dual Asymmetric 110° Flat Fan
20-60 psi Optimal Pressure Range
Two Air Mix nozzles in DualFan Cap for increased backside coverage. Polyacetal construction. No tools required for disassembling.
- AMCQ Acid Resistant AirMix® Venturi Nozzle, 110° Flat Fan
Designed to improve cotton defoliation applications.
Ideal for other low pH applications.
45-90 psi Optimal penetration and coverage
Two piece, polypropylene construction with EPDM o-ring. No tools required for disassembling. Fits standard caps (acid resistant polypropylene cap is available).
Available in sizes: 015, 02, 03, 04, 05, and 06
- AMOC Low Drift AirMix® Off Center Nozzle
Drift resistant off center spray pattern for end nozzle applications and directed sprays.
20-60 psi Optimal pressure range
Two piece, polyacetal construction. No tools required for disassembling. Fits standard caps.
Available in sizes: 02, 025, 03, 04, and 05
Airmix® Low Pressure Nozzle (AM)
| Low Cost | AirMix® offers the most economical solution for drift control |
| Easy Maintenance | No tools required for servicing |
| Quick Retrofit | Fits standard nozzle caps |
| Reduced Plugging | AirMix® utilizes a unique air cleaning system found on no other nozzle |
| Reduces drift by 50-80% | When compared to conventional low drift nozzles. |
| Operates at lower pressures | Optimal pressure is 20-60 psi; overall range is 15-90 psi (great with rate controllers). |
| Fits standard caps | Can be used on all types of sprayers. |
| Unique patented air cleaning system | Prevents air hole plugging. |
| Compact size | 7/8″ long |
| Excellent coverage | Proven in 3 gpa glyphosate applications, as well as many contact applications. |
| Drift control made easy. | Less coarse than other air injection nozzles for better coverage at standard pressures. |
