Blended Pulse™ Nozzle for PWM Nozzle, BP11005, GreenLeaf Technologies, Brown
- DROPLET SIZES: VC-M
- GPM/Nozzle: .35-.71
- Pressure Range: 20-80 psi
- Recommended Boom Height: BP: 18-36” BPDF: 15-25” (with 20” nozzle spacing)
- Materials of Construction: Polyacetal, EPDM
- Nozzle Type: Blended Pulse, for PWM
- Color: Brown
- Use: General Purpose Nozzle
We recommend keeping the duty cycle between 50 and 100%, and the pressure between 20 and 80 psi, depending on the application.
Download your Greenleaf Nozzle Spacing Tab Chart Here, Direct From Our Knowledge Base!
Blended Pulse™ and Blended Pulse™ DualFan Nozzles for PWM Systems
The Blended Pulse™ nozzle is a purpose built non-air injected nozzle for Pulse Width Modulation systems, providing consistent spray patterns and flow
rates. This design produces the most effective droplet spectrum of Medium to Coarse to Very Coarse (depending on the nozzle size and pressure), making
these nozzles truly general purpose. Lower pressures will be better for burndown applications where drift control is important, and slightly higher pressures
will be best for coverage critical applications like contact herbicides, fungicides and insecticides. The dual patterns of the Blended Pulse™ DualFan
eliminate any concern about missing the target due to the nozzles being off for a fraction of a second (even at higher speeds). To maximize coverage, BPDF
nozzles may be alternated on the boom to provide four angles of spray orientation into the canopy, effectively spraying the target four times in one pass.
We recommend keeping the duty cycle between 50 and 100%, and the pressure between 20 and 80 psi, depending on the application.
