Contractor Grade PTFE Pipe Thread Seal 1/2″x 520 in, CHEM-55008PQ
Pipe Thread Seal Tape
Suitable for standard, non-challenging thread seal requirements.
This standard and slightly thicker 4mil pipe thread seal tape is made from 100% virgin PTFE and has a stated tolerance for extreme temperatures ranging from -375⁰F to 500⁰F.
Available in varying widths from ½” to 1”. Manufactured with a standard density of 0.28 gm/cm³.
Temperature range use: Gases and Liquids from -50° F (-45° C) to +400° F (+204° C).
Pressure range use: Gases up to 3,000 PSI. Liquids up to 6,000 PSI.
Brushable to: -50° F (-45° C).
Sets up to: Soft-set, non-hardening.
Contents: Non-toxic inert oils and carbonates. Contains no lead or silicone.
Product description: PTFE Thread Sealant
Composition: Pure PTFE
Thickness: 4.0 mil
Density: 0.36 gm/cm3
Pressure: 2000 psi
Tensile Strength: 3.5 lbs/inch
Temperature Range: -375°F to 500°F
Inert Product: No Limit On Shelf Life
A-A-58092 (supersedes MIL-T-27730A)
The physical and performance characteristics shown are averages obtained from tests recommended by ASTM, government agencies or our own procedures. A particular roll may vary slightly from these averages and it is recommended that the purchaser determine the suitability for his own purpose.
DOWNLOAD PTFE PIPE THREAD SEAL PRODUCT DATA SHEET HERE
DOWNLOAD PTFE PIPE THREAD SEAL MATERIAL SAFETY DATA SHEET HERE