22-20awg Metri-Pack Connectors Terminal, 150 Series, Sealed, Male, Pin

Contact-Terminal, Delphi-Aptiv 12077628 Metri-Pack 150 Series, Male Contact, Pin, 22-20 AWG, 14 Amp Max | 415P-2220

• Manufacturer: Delphi-Aptiv
• Manufacturer OEM PN#: 12077628
• Contact Use:  Receptacle Connectors
• Wire Gauge:  22-20
• Category: Metri-Pack 150 Series
• Max Current 14 Amps
• Operating Temperature: -40c to 125c
• Cable Diameter: 2.4mm to 1.47mm
• Use in high demand situations along with low-energy electronic circuits
• Empty cavities must be filled with cavity plugs

Aptiv-Delphi brand Metri-Pack sealed connectors are available in device and in-line connections for underhood vehicle applications.  Metri-Pack 150 Series connectors can meet or exceed the requirements for most marine, appliance, and industrial control applications. Utilizing triple-rib peripheral silicone rubber seals, Metri-Pack 150 Series sealed systems are ideally suited for critical, low-energy electronic applications that require protection from environmental hazards.

Metri-Pack 150 Series Applications

• Agriculture
• Marine
• Automotive
• Large Trucks, Semi
• Dump Trucks
• Engine & Motor Applications
• Construction Equipment
• Off-Road
• UTV/ATV Vehicles

Metri-Pack 150 Series Features

• Connector Position Assurance (CPA)
• Terminal Position Assurance (TPA)
• 14 Amps continuous maximum current rating
• Small overall dimensions
• Low energy, low voltage capability
• Excellent resistance to temperature, chemicals and abrasion
• -40ºC to 125ºC temperature range

Metri-Pack 150 Series Technical Specs

• CABLE RANGE (mm2): …….. 0.35-1.0
• CURRENT RANGE (AMPS): ……… 0-14
• TEMP RANGE OC: ……….. -40 to 125
• RESISTANCE: …….. <10mW@20mV
• VOLTAGE DROP: ….<10.0 mV/amp
• CENTERLINE SPACING (mm): …….. 6.0
• BLADE WIDTH (mm): ……………… 1.5

CONNECTION SYSTEMS

Delphi Metri-Pack Connection Systems utilize internationally standardized male blade sizes, allowing for flexibility in design.  Blade sizes range from 1.5 mm to 8 mm with current capability ranging from 14 to 60 amps.  Metri-Pack Connectors are designed to be compatible with processing techniques such as automated pull-to-seat and push-to-seat assembly, dual-stage crimping, load cell crimp inspection and automated part identification and orientation. Delphi Metri-Pack Connector systems with silver interface platings pass the SAE® (Society of Automotive Engineers) J2030* Heavy-Duty Electrical Connector Standard.

Ideal for low energy electronic circuits or power circuit applications, the Metri-Pack product line includes:

• High-performance interconnects in sealed or unsealed versions
• Custom-engineered direct connections to motors, switches, sensors and other devices
• Environmentally sealed electronic headers with current capacity of 14 amps, designed for service in severe environments
• Junction blocks and electrical centers

Benefits

• Pass SAE J2030* Heavy-Duty Electrical Connector Standard (with silver interface platings)
• Extended product range offers significant design and application versatility
• Used in high current to low energy circuits for electrical versatility
• Strength and stability of terminals helps assure correct alignment
• Utilizes internationally standard male blade sizes for design flexibility
• Connector Position Assurance (CPA) and Terminal Position
• Assurance (TPA) for superior connection reliability
• Sealed version for excellent resistance to temperature, chemicals and abrasion
• Testing to SAEJ2030

Typical Applications

Metri-Pack Connection Systems are suited for use in flat blade connections for electronic through high current applications.

Performance Advantages

With an extended product range, Metri-Pack Connection Systems offer significant design and application versatility. Metri-Packs feature Terminal Position Assurance (TPA), Connector Position Assurance (CPA), serrated crimps and triple-rib peripheral seals. In addition, these field-proven systems provide exceptional performance, confirmed over many years on global applications.