DTP Gray; Keyed: NO, Complete Connector Kit, 2 Circuits, Includes Size 12, Stamped Contacts
- DTP04-2P-E004
- 1060-12-0166
- WP-2P
TE Connectivity / DEUTSCH DTP Connectors
TE Connectivity / DEUTSCH DTP Series Connectors build on the DT and DTM design strengths to fill the need for higher amperage, multi-pin, inexpensive connectors. Meeting the same specifications as the DTM and DT, the connectors offer designers the ability to use multiple 12 gauge contacts, each with a 25A continuous capacity, within a single shell. Based on the DTM overall design, the DTP connectors offer the protected interfacial seal located within the receptacle shell and has a standard multi-seal grommet in both the plug and receptacle. The connectors are available in two and four pin configurations.
FEATURES
- 1bar pressure
- -55 C to +200 C operating temperature range
- Altitude sealing
- Aerospace fluids resistant
- 48h to 500h salt spray
- Aluminum or stainless steel body
- Compact
- Weight saving
- Many arrangements existing
- Cost saving
- 10-14AWG
- 2- and 4-cavity arrangements
SPECIFICATIONS
- Operating Temperature: -55 C to +125 C continuous at rated current operating temperature
- Durability: 100 cycles of engagement and disengagement with no electrical or mechanical defects
- Vibration: After sinusoidal vibration levels of 20Gs at 10-2000Hz in each of the three mutually perpendicular planes:No unlocking or unmating
- Exhibits no mechanical or physical damage
- No electrical discontinuities longer than 1ms
- MIL-STD 202, Method 213, Condition “C” Physical Shock: During, or after, 50Gs in each of three mutually perpendicular planes:
- No unlocking, unmating, or other unsatisfactory result
- No electrical discontinuities longer than 1ms
- Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications
- Insulation Resistance: 1000M minimum at 25 C
- Moisture Resistance: Properly wired and mated connections withstand immersion under three feet of water without loss of electronic qualities or leakage
- Dielectric Withstanding Voltage: Current leakage less than 2mA at 1500VAC
- Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55 C to +125 C
TE Connectivity / DEUTSCH DTP Connectors
TE Connectivity / DEUTSCH DTP Series Connectors build on the DT and DTM design strengths to fill the need for higher amperage, multi-pin, inexpensive connectors. Meeting the same specifications as the DTM and DT, the connectors offer designers the ability to use multiple 12 gauge contacts, each with a 25A continuous capacity, within a single shell. Based on the DTM overall design, the DTP connectors offer the protected interfacial seal located within the receptacle shell and has a standard multi-seal grommet in both the plug and receptacle. The connectors are available in two and four pin configurations.
FEATURES
- 1bar pressure
- -55 C to +200 C operating temperature range
- Altitude sealing
- Aerospace fluids resistant
- 48h to 500h salt spray
- Aluminum or stainless steel body
- Compact
- Weight saving
- Many arrangements existing
- Cost saving
- 10-14AWG
- 2- and 4-cavity arrangements
SPECIFICATIONS
- Operating Temperature: -55 C to +125 C continuous at rated current operating temperature
- Durability: 100 cycles of engagement and disengagement with no electrical or mechanical defects
- Vibration: After sinusoidal vibration levels of 20Gs at 10-2000Hz in each of the three mutually perpendicular planes:No unlocking or unmating
- Exhibits no mechanical or physical damage
- No electrical discontinuities longer than 1ms
- MIL-STD 202, Method 213, Condition “C” Physical Shock: During, or after, 50Gs in each of three mutually perpendicular planes:
- No unlocking, unmating, or other unsatisfactory result
- No electrical discontinuities longer than 1ms
- Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications
- Insulation Resistance: 1000M minimum at 25 C
- Moisture Resistance: Properly wired and mated connections withstand immersion under three feet of water without loss of electronic qualities or leakage
- Dielectric Withstanding Voltage: Current leakage less than 2mA at 1500VAC
- Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55 C to +125 C
