SprayMax™ DF Asymmetric DualFan Nozzles, 10° forward and 50° rearward, DF025, Greenleaf Technologies, Orange-Green
SprayMax Asymmetric DualFan Nozzles for PWM Systems
The SprayMax DualFan Nozzle is a non-air injected nozzle that employs conventional flat fan tips in an asymmetric dual cap. The dual tips are oriented
10° forward and 50° rearward to provide a combination of penetration and backside coverage in complex canopies. To maximize coverage, the nozzles
may be alternated on the boom to provide four angles of spray orientation into the canopy, effectively spraying the target four times in one pass. This
nozzle can also be used without a PWM system, functioning as a conventional nozzle that can produce a Medium to Fine droplet spectrum.
The Medium to Fine droplet spectrum coupled with the asymmetric DualFan spray pattern of the SprayMax DualFan makes it an exceptional nozzle for
fungicide, insecticide, and other contact critical broadcast applications.
Dual tips are oriented 10° forward and 50° rearward to provide a combination of penetration and backside coverage in complex canopies.
- DROPLET SIZE: F-VF
- GPM/Nozzle: .18-.31
- Pressure Range: 20-80 psi overall pressure range
- Recommended Boom Height: 15-25” (with 20” nozzle spacing)
- Materials of Construction: Polyacetal, EPDM construction
- Color: Orange-Green
- Nozzle Type: Dual tips are oriented 10° forward and 50° rearward
- Nozzle Use: Dual fan for thick canopies, exceptional nozzle for fungicide, insecticide, and other contact critical broadcast applications.
Download your Greenleaf Nozzle Spacing Tab Chart Here, Direct From Our Knowledge Base!
SprayMax™ TipCap Spray Nozzle, 110°
- One piece extended range spray tip with integral quick connect cap.
- 15-60 psi pressure range
- Requires gasket or Gripper Tip Strainer.
The SprayMax™ TipCap Nozzle(TCP) is a spray tip and cap that is made as one piece! There’s no more fumbling with the small parts when changing or cleaning spray nozzles. This reduces the chance of your tips ending up in the dirt.
A combination tip and cap molded as one piece that is less expensive than a standard tip alone! A maximum range (total range, extended range) spray tip that can be operated from 15 to 60 psi.
The TCP’s tip is made of Polyacetal for economy and low maintenance. The tip is integrally molded into a polyacetal cap that fits most standard boom fittings.
Already equipped with nozzle caps? Simply add Greenleaf’s SprayMax™ Extended Range Nozzle Tips (SMP) to your caps and experience the SprayMax advantages in a low cost solution. The SMP Nozzle is available in a range of sizes to give you the flow rate you need.
If you need a more narrow spray pattern, the SprayMax SMP is available an 80° version in 03, 04, 05, and 06 sizes with the part numbers SMP8003, SMP8004, SMP8005, and SMP8006.